Hidden hatches with push mechanism
Our range includes pressure hatches under tiles, hatches for painting into the wall or ceiling, as well as floor hatches with gas shock absorbers. When closed, these hatches are practically invisible against the general surface background, which is why they are called hidden hatches (concealed or sanitary hatches). Thanks to concealed hatches communications will be practically hidden. The hidden hatch allows you to realize any design solutions in the bathroom, kitchen or other rooms without looking at the existing plumbing and other engineering communications
PURPOSE OF INVISIBLE HATCHES
Provide access to sanitary and other engineering utilities
utilities
For finishing with ceramic tiles, mosaics, artificial and natural stone and other finishing materials
Installed indoors in walls of any material
Silicone seal around the perimeter of the door
Prevents penetration of moisture, noise and dust
CombiTOUCH® magnetic push locks
The hatch can be opened either by pushing or using a suction cup
Available standard sizes
Width from 20 to 60 cm, height from 30 to 120 cm
The hatch door is equipped with a lightweight moisture-resistant «Gyproc» sheet
Completely invisible after installation
Door opening angle up to 180º
Invisible hatch with push mechanism
Design
Sanitary hidden hatches are fitted with a two-link hinge, which allows the door to first extend parallel to the wall surface and only then open. This is the principle used to open the doors of airplanes and modern buses. Thanks to this design, the tiles do not require special trimming when laying.
The hatch is installed inside the revision opening and fixed with self-tapping screws. The tiles are glued so that their edges protrude beyond the boundaries of the hatch. The edges of the surface of the protruding tiles glued on the hatch are smeared with silicone of the same color as the inter-tile joints, and then cut with a painting knife.
Hidden hatches under tiles
Aluminum hatches with a depth of 45 (series “ATP”) and 55 mm (series “ETP”) depending on the size. They have a profiled silicone seal around the perimeter of the frame, which provides reliable dust and moisture protection of the space behind the hatch.
The door position can be adjusted in three directions: horizontally, vertically and tilted. Equipped with a powerful CombiTOUCH® magnetic push lock, which ensures stable opening of the hatch without jamming, even if the door is lined with very heavy material.
Installation features
The glued tile may protrude from the door dimensions by no more than 50 mm on the hinge side and from 5 to 75 mm on the other sides.
No trimming of tiles is required when gluing to the hatch door
Door adjustment: vertically, horizontally, angle of inclination
Available sizes: Width from 20 to 60 cm, height from 30 to 120 cm.
In our office you can see all products offered by http://LUUGID.EE. Most of the goods are available in our representative office. You can purchase the goods on the spot by paying by card or cash. It is advisable to inform us in advance about your arrival by phone +372 5801 2000 or by e-mail info@luugid.ee, also to clarify the availability of the goods at the delivery point or the delivery time from the warehouse.
