Mon-Fri: 9 a.m. – 5 p.m.
Master-S 30×30
54,86 €
20 in stock
First class paintable walls and ceiling hatch with removable door. Rigid aluminum profile. Push locks. The strongest hatch for painting. The hatch is equipped with a safety cable so that the hatch door does not accidentally fall out when opening. No difficulty in installation.
FEATURES OF THE HATCH UNDER PAINTING
- The depth of the hatch profile is only 40mm. And the depth of the hatch together with the lock is 47mm.
- The hatch opens and closes by pressing on the hatch door. No additional handles, suction cups, locks, etc. are required.
- The hatch can be easily installed in the openings of walls or ceilings made of various materials: concrete, brick, foam block, plasterboard 12,5 and 25mm, wood, etc.
- Sealing tape around the perimeter of the hatch prevents the entry of moisture, odors, dirt and dust.
- The hatch door is made of moisture-resistant plasterboard 12.5 mm thick.
- To install the access panel, you will need a wall frame or supporting elements around the perimeter of the installation size (hatch size +3mm). The hatch frame will be attached to these using screws (see instructions).
Characteristics of hatch Master-S 30×30:
- Location and type of hatch: For walls and ceiling, with removable door and safety rope.
- Hatch finish options: Putty, paint, wallpaper and other materials, thickness not exceeding 3 mm.
- Opening and closing method: By pressing on the hatch door.
- Equipment: chain, 2 locks.
- Hatch frame size Width x height x depth: 300 mm х 300 mm х 40 mm.
- Size of the open hatch opening Width x height: 268 mm х 268 mm.
- Hatch material: Aluminum profile, moisture resistant plasterboard 12.5 mm.
- Total hatch weight: 1.12 kg.
| Weight | 2 kg |
|---|---|
| Dimensions | 31 × 31 × 5 cm |
Installation instruction “Master-S”
- Prepare an opening for the hatch in the wall;
- Remove the door from the hatch;
- Install the frame in the prepared opening. Attention! The hatch should be in the opening freely, not clamped;
- Align the position of the frame in the opening using a construction level;
- Fix the frame in the opening with screws;
- Fill the gap around the perimeter of the frame;
- Prime the door and prepare it for painting, wallpaper, etc…;
- Finish the hatch door along with the entire wall;
- The hatch opens by pushing.
Attention! Each door panel is strictly for its own mounting frame. Replacement of the door panels is not possible! Important: When the door is mounted on the wall, it can only be opened from above. Side opening is not possible!
Kipsiluuk F2 50×50 25mm
67,13 €
Tablet 30×30
64,85 €
Kipsiluuk F2 30×30 25mm
50,53 €
Kipsiluuk F2 60×60 25mm
74,18 €
Master 20×20
40,74 €
Master-S 75×120
201,18 €
Master-S 60×100
131,93 €
Master 30×60
66,34 €
Tablet 50×50
83,53 €
Tablet 40×40
71,64 €
Master-S 40×40
64,70 €
Master 60×60
80,43 €
Kipsiluuk F1 40×40 12,5mm
38,12 €
Kipsiluuk F2 20×20 25mm
42,32 €
Kipsiluuk F1 20×20 12,5mm
26,88 €
